Skip to main content
  • hello@summitenergy.com.my
  • +03-8605 2486
Solar PV · Malaysia

Turn rooftop sunlight into lower bills, for good.

Summit Energy designs, installs, and supports solar PV and battery systems for homes and businesses across Malaysia — sized to your actual TNB tariff, not a flat percentage guess.

Up to 80%

Bill reduction with storage

 

7 -10 yrs

Typical payback

 

30 days

Install turnaround

 

Quick Savings Estimate

RM 600
Estimated monthly savings
RM 220 – RM 260

Indicative only — modelled on the RP4 tariff with ATAP export at the Energy Charge. Your roof, daytime usage and tariff decide the real number.

Get Exact Proposal
SEDA-registered Solar ATAP applications
30-day installation guarantee
Long-term warranty & support
Residential, commercial & BESS
What We Build

Three ways we cut your energy cost.

Every system is engineered around your actual consumption profile — not a one-size package.
01

Residential Solar

Rooftop PV systems for landed homes, sized to your household's real usage and roof capacity under Solar ATAP.
System size
3–12 kWp
Payback period
7-10 years
Starting investment
RM 18,000
02

Commercial Solar

Turnkey rooftop and ground-mount systems for factories, warehouses, and offices — engineered for long-term ROI.
System size
15 kWp+
Tax incentives
GITA / GITE
Three-phase cap
15 kWac
03

Peak Shaving (BESS)

AI-managed battery storage that controls your RP4 Capacity & Network charges and stores surplus solar for after-hours use.
Responds in
< 1 second
Demand charge cut
Up to 30%
Backup power
Optional add-on
See It In Numbers

How much could you save?

Five bill sizes with the system we'd realistically fit to each. The percentage is highest on smaller bills — a modest system covers proportionally more of a modest household, and dropping under 600 kWh/month also removes the retail charge, AFA and SST from your bill entirely.
Monthly BillSystemSolar Only — SaveSolar + Battery — Save
RM 3004 kWpRM 180–200 (62–69%)RM 230–240 (77–82%)
RM 6006 kWpRM 230–260 (39–44%)RM 330–370 (55–62%)
RM 9008 kWpRM 340–380 (39–42%)RM 430–470 (48–52%)
RM 1,20010 kWpRM 430–480 (36–41%)RM 580–620 (49–52%)
RM 1,50012 kWpRM 510–580 (34–39%)RM 700–770 (47–52%)
Solar only — 30–45% of generation used directly; the rest exported at the Energy Charge
Solar + Battery — 70–85% used directly, capturing evening load instead of exporting it cheaply
Modelled on the RP4 domestic tariff (44.43 sen/kWh combined for usage under 1,500 kWh) at 3.8 kWh/kWp/day — a realistic Malaysian yield. Self-consumed generation avoids the full combined rate; surplus exported under Solar ATAP is credited at the Energy Charge only (27.03 sen/kWh), capped by MAQ and forfeited if unused. Percentages fall as bills rise because larger households need proportionally more roof than most have. Your figures are confirmed at site inspection.
Why Now, Not Later

Tariffs and ATAP terms shift. Locking in sooner protects this year's savings.

Solar ATAP applications, SEDA quotas, and TNB tariff structures change over time. The earlier your system is commissioned, the sooner — and longer — you lock in today's offset terms.

Lower electricity bills

Self-generated power directly offsets what you'd otherwise buy from TNB at retail rates.

Lower carbon footprint

Every self-consumed kWh is one less kWh drawn from the grid's fuel mix.

More energy independence

Add storage and keep essential loads running through outages and peak-rate hours.

Low ongoing maintenance

No moving parts on the panels themselves; periodic cleaning and inspection is all it takes.
How It Works

From consultation to
commissioning, in five steps.

Consultation

We understand your usage pattern and savings potential — free, no obligation.

Site Inspection

A short visit confirms roof orientation, shading, condition, and electrical capacity.

Design

System finalized and sized precisely to your usage, roof, and ATAP capacity.

Installation

Fast, clean, fully compliant setup — typically completed within 30 days.

Support

Ongoing monitoring, maintenance, and help long after commissioning.
Regulatory Scheme

Solar ATAP & SELCO, side by side.

Most installers won't walk you through this. We think you should know exactly what scheme your system runs under, and why.

FeatureSolar ATAPSELCO
Export creditYes — capped by MAQ (inverter kWac × 5 sun-hours × days)None — 100% of non-self-consumed generation is unused
Single-phase cap5 kWac5 kWac
Three-phase cap15 kWac12.5 kWac
Contract10-year, non-extendableNone
ApplicationSEDA eATAP, RM7.50/kW feeForm of Information to TNB, no fee
MeterBi-directional TNB meter swap, 2–6 weeksNo meter swap required
Why this matters: Solar ATAP suits most homes and businesses that export surplus generation back to the grid. SELCO is worth considering only when paired with a battery large enough to use most of your own excess generation directly. We help you choose the right scheme during consultation — not after signing.

RM230–260

Modelled monthly saving for a 6 kWp system on a ~1,200 kWh household, under the RP4 tariff and Solar ATAP export terms.

RM 33,500

Cumulative 10-year saving for the same household, allowing 0.5%/yr panel degradation and 3%/yr tariff escalation.

Up to 80%

Best-case bill reduction, on a smaller household where solar plus storage covers most of the load. Larger bills offset a smaller share. Fixed charges cannot be removed by generation.
Let's Get Started

Ready when you are.

Tell us about your property and current bill — we'll come back with a proposal built on your actual numbers.